Common Settings Field Definitions for TaskBuilder Task Packages

Wired Training Device

Enabled: The device's red port is configured to use a wired training device.

Disabled: The device's red port is not configured to use a wired training device.

Poweroff Timeout (min)

Number of minutes that a device should stay asleep before automatically powering itself off.

Ideal Dot Wait Timer

Enabled: The ideal timer evaluates .wait conditions every 0.1 seconds.

Disabled: The legacy timer evaluates .wait conditions every 0.5 seconds.

No Talk Over Priority Prompt

Enabled: Operators must wait until the end of priority prompts before the device will accept spoken input.

Disabled: Operators can speak over priority prompts, and the device will accept the command.

Restart Task in Charger

Enabled: When the device is put into the charger, the task starts over from the beginning.

Disabled: The task remains at the point where it was when the device was put into the charger.

Speech Wait

Number of seconds that a device waits after the operator has not spoken before the device goes to sleep.

ODR Confirmation Byte

None: The device will not wait for confirmation that the host application received the Output Data Record.

Any: The device will accept any byte sent from the host application as confirmation that it received the ODR.

Specify: The host application must send the byte that you specify in the field to the right as confirmation that it has received the ODR from the device.

ODR Flash Data Persistence

Enabled: ODRs are stored in the device's flash memory before they are sent to the host application.

Disabled: ODRs are sent directly from memory and not stored in the device.