AutoOperatorPromptEnable

Description

If a site is using the automatic-operator-load feature, this parameter determines whether an operator must press the operator button to initiate an operator load when the headset and the device are not associated with the same operator or whether that operator load occurs automatically without the operator pressing the operator button. When the parameter is enabled, the operator is forced to press the operator button to initiate the load.

You might consider disabling this parameter if workers are confident that the proper operator is being loaded and don't want to spend time confirming it.

Valid Values

• 0 = the operator load occurs automatically when the headset and device are associated with different operators
• 1 = the operator must press the operator button to initiate the operator load when the headset and device are associated with different operators

Default

• 1

Works on Devices

• A700x
• A700
• A500

Task Type

• TaskBuilder
• VoiceArtisan