AutoOperatorLoadEnable

Description

Used to globally enable the automatic-operator-load feature. This feature is used to automatically load an operator onto a device when the headset with which the operator has been associated is connected to the device.

You might consider disabling this parameter if you are using A500 devices and SRX2, SRX3, or SRX-SL headsets, and users are sharing the headsets' electronics modules. Automatic operator loading should also be disabled if each operator uses the same specific device and headset for each shift.

Valid Values

• 0 = Operators must be loaded manually to a device
• 1 = The operator is automatically loaded onto a device when the user attaches their headset to the device

Default

• 1

Works on Devices

• A700x
• A700
• A500

Task Type

• TaskBuilder
• VoiceArtisan