Socket Series 7P Test Summary

Product Tested: Socket Series 7P Imager

Socket Part Number: CX-2862-1298

Peripheral firmware version: 1.2.0

Peripheral Type: Bluetooth compact handheld scanner

Comments: This report is only applicable for the part number (CX-2862-1298) tested by Honeywell.

Test Cycle: Dec-2011

Honeywell software products used: VoiceCatalyst 1.1 / VoiceClient 3.8.1

Honeywell hardware products used: Talkman A500 and Talkman T5

Test Status: Passes with workarounds

Tests Performed - Peripheral Bluetooth Scanner Scenarios:

• Basic pairing with device as initiator
• Basic pairing with device as acceptor
• Sleep/On state change on device and effect on scanner (initiator and acceptor)
• Operator state change on device and effect on scanner  (initiator and acceptor)
• Out of Wi-Fi Range
• Out of Bluetooth Range
• Change paired Scanner
• Re-pair after power off
• Scanner reconnects after placed in charger
• Scanner reconnects after power up in a charger
• 200+ char barcode test
• Code 39 and 128 barcode test
• Rapid scanning (4/sec and 40/10 sec)
• Testing with other peripherals (SRX, Bluetooth printer etc)

Tests Performed - VoiceConsole Scenarios:

• Pairing through VoiceConsole
• Clearing from VoiceConsole
• Pairing with multiple Bluetooth devices (Printer, SRX etc)
• New pairing clears old pairing
• Pair two Peripheral devices with same Talkman device

Tests Performed - Failure Scenarios:

• Battery pull of Talkman device when paired and running through scanning task
• Pull Talkman device battery in the middle of pairing
• Walk out of range of Wi-Fi and pull Talkman battery
• Walk out of Bluetooth range of paired devices and check for scanning operation and its communication with VoiceClient on T5
• Walk out of range of Talkman device and power down Peripheral (scanner) device
• Attempt to clear pairing from VoiceConsole when Peripheral device is out of Bluetooth range from Talkman device

Tests Performed - Stress Scenarios:

• Pair Bluetooth scanner, printer, and SRX with Talkman device via VoiceConsole
• Pair Bluetooth scanner, printer, SRX,  then cradle Talkman device
• Pair Bluetooth scanner, printer, SRX, then pull/replace battery on Talkman device
• Pair Bluetooth scanner, printer, SRX, then power off/on Talkman device
• Attempt to pair Talkman device with Scanner while device is cradled
• Attempt to pair Scanner with device while scanner is being charged
• Attempt to pair peripherals without/with required parameters

The scanner does not pair with Talkman when the scanner is initiator. However, It is possible to use this scanner with Talkman as an initiator. Pairing of scanner with Talkman needs to be done using VoiceConsole. Hence this scanner may not be suitable for all customers.