Setting up the Motorola CS3070 Bluetooth Scanner

  1. Plug the Motorola CS3070 Bluetooth Scanner into your PC through the USB cable that comes with the scanner.
  2. Once the scanner is connected open the Parameters folders and find the config.ini file.
  3. Open the config.ini file in a text editor to modify some default values so that the CS3070 will work with Talkman devices.
    1. Change the suffix to CR, LF (default is LF, CR).
    2. Change the BTProfile to SPP (default is HID).
    3. Set prefix (0x69) to 0x00.
    4. Set suffix 1 (0x68) to 0x0d (CR).
    5. Set suffix 2 (0x6a) to 0x0a (LF).
  4. Find the parameter BTPin and write down the value. This is the pin for Bluetooth pairing.
  5. Save your changes to the config.ini file.
  6. Find the Bluetooth address of the scanner by following these steps.
    1. Press and hold the Plus button for 5 seconds to power on the scanner.
    2. Press and hold the round button that has the Motorola logo for another 5 seconds or until you hear a beep and see a blue flashing light, the scanner is now in discoverable mode.
    3. From your PC, under Bluetooth connections search for this scanner to find the Bluetooth address. When you have the address, follow the usual steps in VoiceConsole to pair the scanner to the Talkman.