Honeywell MS9535 Bluetooth Barcode Reader Specifications

Barcode Reader Firmware Defaults

• The Honeywell MS9535 must be at firmware version 10547 or newer in order to correctly operate with the T2x Series Bluetooth Serial Adapter
• The reader transmits at 9600 baud, 8 bits, no parity, 1 stop bit
• The default suffix values of Carriage Return (hex 0D) and Line Feed (hex 0A) are sent after each scan
• Set to keep-power-on ("BarcodeKeepPowerOn" must be set in the task to maintain a consistent connection with the Bluetooth Adapter)
• Beep sequences are heard on successful connection or reconnection with the Bluetooth Adapter and when the scanner is out of range of the Adapter (generally, greater than 30 feet or 10 meters).
• A confirming beep tone is heard after each scan
• A "razz" tone and flashing white status light are generated after a scan when the scanner is not communicating with the Bluetooth Adapter
• Code scanned must be a minimum of 3 characters
• Codes UPC, EAN, Code 39, Codabar, Code 128, Code 93, Interleaved 2 of 5 are enabled