Intermec PB50 W-Fi Printer Test Summary

Product Tested: Intermec PB50, Wi-Fi Printer

Intermec Part Number: PB50B11804100

Peripheral firmware version: IPL 11.4.0

Peripheral Type: Wi-Fi Mobile Wearable Label Printer

Test Cycle: Dec-2011

Honeywell software products used: VoiceCatalyst 1.0.1 / VoiceClient 3.8.1

Honeywell hardware products used: Talkman A500, Talkman T5

Test Status: Passes all

Tests Performed - Bluetooth Printer Scenarios:

• Basic Pairing with Talkman as initiator
• Test the ability to print using Talkman and VoiceConsole
• Test the ability to print after the device goes into sleep mode and wakes up again
• Test the ability to change an operator while scanning and printing without affecting scanning and printing functionality
• Test the ability to re-pair printer and terminal after the device is cradled
• Test that Wi-Fi printer displays proper status messages when trying to pair or already paired
• Test the ability to print while being paired with SRX Bluetooth headset and scanners

Tests Performed - Stress Scenarios:

• Test that scanning and printing can be done out of range and that ODRs are successfully transferred once back in range
• Test that a Bluetooth scanner and printer will re-pair with the device after being taken out of Bluetooth range of the device and then brought back
• Device Re-Pairing after Power off

Notes regarding usage

• Printing through VoiceConsole using “Test Print ” does not print any pages. However, “ Test Print ” through a Talkman and task works fine.
• The printer testing was done in “CSim” mode. Please refer to printer documentation on how to configure printer in “CSim” mode.
• The printer may take some time in printing ODR data when it is removed from the network and brought back again into the wireless coverage.
• Intermec PB50 supports both IPL (Intermec Printer language) and CSim. In this testing, VoiceApp (Task) used CSim  to communicate with PB50 printer.