Intermec PB50 Bluetooth Printer Test Summary

Product Tested: Intermec PB50, Bluetooth Printer

Intermec Part Number: PB50A12004100

Peripheral firmware version: 11.4.0

Peripheral Type: Bluetooth Mobile Wearable Label Printer

Test Cycle: Dec-2011

Honeywell software products used: VoiceCatalyst 1.1 / VoiceClient 3.8.1

Honeywell hardware products used: Talkman A500, Talkman T5

Test Status: Passes all

Tests Performed - Bluetooth Printer Scenarios:

  • Basic Pairing with Device as initiator
  • Test the ability to switch from Bluetooth scanners and printers to serial scanners and printers and back
  • Test the ability to place the device into SLEEP and ON states while scanning and printing without affecting scanning and printing functionality
  • Test the ability to noise sample while scanning and printing without affecting scanning and printing functionality
  • Test the ability to retrain a word while scanning and printing without affecting scanning and printing functionality
  • Test the ability to change an operator while scanning and printing without affecting scanning and printing functionality
  • Test the ability to change an operator's speed setting while scanning and printing without affecting scanning and printing functionality
  • Test the ability to change an operator's pitch setting while scanning and printing without affecting scanning and printing functionality
  • Test the ability to change an operator's speaker setting while scanning and printing without affecting scanning and printing functionality

Tests Performed - Stress Scenarios:

  • Test that scanning and printing can be done out of range and that ODRs are successfully transferred once back in range
  • Test is to verify that scanning and printing can be done while out of range
  • Test that a Bluetooth scanner and printer will re-pair with the device after being taken out of Bluetooth range of the device and then brought back
  • Test validates the ability to change from one paired Bluetooth scanner to another and perform normal operations
  • Device Re-Pairing after Power off

The Intermec PB50 supports both IPL (Intermec Printer language) and CSim. In this testing, VoiceApp (Task) used IPL (Intermec Printer language) to communicate with PB50 printer. Please refer to PB50 printer documentation to configure the printer in IPL (Intermec Printer Language) mode.