Setting up the Intermec SR61T Scanner

The SR61T must be configured in hibernation mode to work with a Talkman device. In hibernation mode, the scanner is not powered off between scans but draws very little power. Therefore, hibernation mode allows the user to scan rapidly with minimal impact on the Talkman battery.

  1. In VoiceConsole, add the following setting to the task package advanced settings.
    barcodeport=red
  2. Scan the following barcode to enable automatic hibernate mode.

  3. Configure the appropriate baud rate for the Talkman device. Honeywell recommends using the following barcodes to set the rates for Talkman T5 Series and Talkman A500 devices. You can configure other baud rates is the Talkman devices are configured for the same rates.
    Talkman T5 Series - RS-232; baud rate 9600

    Talkman A500 - RS-232; baud rate 19200