Pairing the Honeywell Granit 1911i Bluetooth Scanner with a Talkman Device: Scanner Is the Initiator

You must have access to VoiceConsole to set up the pairing. For production use, Honeywell recommends that you create a specific device profile in VoiceConsole to store many of the following settings.

  1. Ensure that the Talkman is labeled with a code 128 barcode. This code contains the FNC3 code followed by the string "LnkB" and the unique Bluetooth MAC address of the Talkman.
    1. If the Talkman does not have a barcode label, generate the FNC3 on a PC with a full keyboard and number pad. Hold the ALT key down and press the four-number sequence "1 0 7 9" on the number pad. A small number 3 will appear to indicate the presence of the code. Some barcode software packages have special insertion keystrokes for FNC3.
    2. Find the Bluetooth MAC address of the Talkman on the rear of the device near the belt clip. The address begins with "BT."
  2. Print this page.
  3. Using VoiceConsole, locate the specific Talkman device to be paired with the scanner.
  4. View the properties of the device, and ensure that Bluetooth is enabled. If it is not enabled, click Edit this device and set Bluetooth Enabled to "enabled."
  5. Select the Pair this device with a peripheral option.
  6. For Pairing Type select "Bluetooth Scanner."
  7. For Connection Mode select "Device listens for peripheral connection."
  8. Enter the default pin of "1 2 3 4."
  9. Click Pair with peripheral to initiate pairing.
  10. To complete the pairing, scan the barcode created for the Talkman device in first step.