Pairing a Bluetooth Scanner With an Intermec CK3X, CK71 or 70-Series Device Using Quick Connect

This procedure is for Intermec CK3X, CK71 or 70-Series Device Using quick connect.

The following processes assume use of the Intermec device as the initiator. If you would like to configure your scanner to be the initiator of the pairing, see the scanner’s documentation for more information. If you pair the scanner with the scanner as the initiator and assign the scanner to a serial port, you must enter or edit the value of the BarcodePort advanced setting to equal the serial port after you pair for the scanner and Intermec device to be properly paired.
  1. Make sure the scanner is on and is discoverable. See the scanner’s documentation for more information.
  2. On the Intermec device, tap Start > Settings.
  3. On the Intermec device, on the System tab of the Settings screen, tap Wireless Scanning.
  4. On the next screen, tap Add Device.
  5. Select if you are pairing an Intermec scanner, and tap Next.
  6. Scan the barcode that appears on the screen with the Intermec scanner.
    A Bluetooth dialog box opens.
  7. In the Bluetooth dialog box, tap Yes to add the scanner to the list of devices paired with the Intermec device.
  8. If prompted, enter the passcode for the scanner, and tap Next. The default passcode for the SF51 and SR61-series scanners is 0000.
  9. Tap Finish.
    The scanner pairs with the Intermec device.
  10. On the Intermec device, tap Start > Settings.
  11. On the System tab of the Settings screen, tap Intermec Settings.
  12. On the Intermec Settings screen, tap Data Collection.
    The scanner's name will appear on the Data Collection screen.
  13. Select the scanner.
    A list of available settings will appear.
  14. Select Scanner Settings.
  15. Activate the Hardware Trigger check box.
  16. Tap OK.
Vocollect Voice software will now allow input from the external scanner you are using.