Intermec SR61 Scanner

The SF61B Scanner is obsolete. The information below is provided as a courtesy to end users.

Talkman Device as Initiator

This method is supported on the A700, A700x, or A500.

Configure SR61 Scanner

To use this scanner with a A700, A700x, or A500 device, you need to generate and scan configuration barcodes:

  1. Install the following on your PC: This can be downloaded from the Honeywell Technical Support Downloads portal:
    • EasySet (to generate configuration barcodes for the scanner), download from Software > Barcode Scanners > Tools and Utilities Drivers > EasySet using the link below
    https://hsmftp.honeywell.com.
  2. You must have an account to download software. Create an account if you don't already have one.
  3. If you have not previously installed the Honeywell Download Manager, you must download and install it before downloading EasySet.
  4. After installing EasySet, start the program and select your scanner model.
  5. Generate a restore factory settings barcode by selecting 2. Reset all parameters > Reset factory defaults .
  6. Scan the barcode, either from onscreen or print the barcode.
  7. If using security:
    1. Use EasySet to generate a security enabled barcode by selecting 3. Interface > Bluetooth > Security > Enable.
    2. Scan the barcode.
    3. Optional: generate and scan a barcode to set a custom pin by selecting 3. Interface > Bluetooth > Security> Compose PIN:.

Configure task and VoiceConsole

  1. Set the following advanced parameter in Task config

    barcodeport = bt_scan

  2. Turn on Bluetooth on the A700, A700x, or A500 device.
  3. View the properties of the device and ensure Bluetooth is enabled. If it is not enabled, click Edit this device and set Bluetooth Enabled to "enabled".
  4. Select Pair this device with a peripheral.
  5. For Pairing type select "Bluetooth Scanner".
  6. For Connection Mode select "Device initiates connection with peripheral".
  7. In the Bluetooth Address field enter the Bluetooth MAC address of the scanner. This 12-character ID is labeled "MAC ID" or "BDA" and is found on a label on the scanner.
  8. Set Security to "Enabled" or "Disabled" as desired.
  9. If using security, set Security Key to "0000" or the PIN entered when generating the custom PIN barcode.
  10. Click Pair with peripheral to initiate pairing.

Scanner as Initiator

Configure SR61 Scanner

To use this scanner with a Talkman device, you need to generate and scan configuration barcodes:

  1. Install the following on your PC:
    • EasySet (to generate configuration barcodes for the scanner), download from Software > Barcode Scanners > Tools and Utilities Drivers > EasySet using the link below
    This can be downloaded from the Honeywell Technical Support Downloads portal: www.hsmftp.honeywell.com.
  2. You must have an account to download software. Create an account if you don't already have one.
  3. If you have not previously installed the Honeywell Download Manager, you must download and install it before downloading EasySet.
  4. After installing EasySet, start the program and select your scanner model.
  5. Generate a restore factory settings barcode by selecting 2. Reset all parameters > Reset factory defaults .
  6. Scan the barcode, either from onscreen or print the barcode.
  7. If using security:
    1. Use EasySet to generate a security enabled barcode by selecting 3. Interface > Bluetooth > Security > Enable.
    2. Scan the barcode.
    3. Optional: generate and scan a barcode to set a custom pin by selecting 3. Interface > Bluetooth > Security> Compose PIN:.
  8. Generate a barcode containing the MAC address of the Talkman device you wish to connect with by selecting 3. Interface > Bluetooth > Bluetooth Quick Connect > Compose BT : and enter the MAC address.
  9. Scan the barcode, either from onscreen or print the barcode.

Configure task and VoiceConsole

  1. Set the following advanced parameter in Task config

    barcodeport = bt_scan

  2. Turn on Bluetooth on the A700, A700x, or A500 device.
  3. View the properties of the device and ensure Bluetooth is enabled. If it is not enabled, click Edit this device and set Bluetooth Enabled to "enabled".
  4. Select Pair this device with a peripheral.
  5. For Pairing type select "Bluetooth Scanner".
  6. For Connection Mode select "Device listens for peripheral connection".
  7. If using security:
    1. For Security select "Enabled."
    2. For Security Key enter "0000" or the PIN entered when generating the custom PIN barcode.
  8. Click Pair with peripheral to initiate pairing.