Honeywell RP2F Printer

Refer to the RP2f/RP4f Mobile Printer User Guide for additional information. The RP2f is a direct replacement for earlier obsolete models RP2d and RP2e.

When pairing a Talkman device with a printer, the Talkman device is the initiator ((or may also be referred to as the host). The Talkman device initiates the connection to the printer and, if disconnected, the Talkman device manages the reconnection. The printer is the acceptor. This may also be referred to as VoiceConsole pairing.

Configure PR2f Printer

  1. Install the following on your PC:
    • NETira CT_1.00.111.zip utility (to configure PR2f settings), download from Software > Printers > Printer Support and Drivers > Printer Configuration Tools > Netira CT using the link below
    This item can be downloaded from the Honeywell Technical Support Downloads portal: https://hsmftp.honeywell.com.
  2. You must have an account to download software. Create an account if you don't already have one.
  3. If you have not previously installed the Honeywell Download Manager, you must download and install it before downloading these items.
  4. After the items above are installed on the PC, power on the PR2f printer.
  5. Attach the PR2f printer to the PC using the printer cable with a serial port on one end and a printer port on the other end.
  6. Open the NETira CT program.
  7. Check for Bluetooth MAC address.
  8. Make other configuration changes as desired, for example enabling security and setting a security key.

Configure Task and VoiceConsole

  1. Set the following advanced parameter in Task config
    printerport = bt_print
  2. Turn on Bluetooth on the Talkman device.
  3. View the properties of the Talkman device and ensure Bluetooth is enabled. If it is not enabled, click Edit this device and set Bluetooth Enabled to "enabled".
  4. Select Pair this device with a peripheral.
  5. For Pairing type select "Bluetooth Printer".
  6. For Connection Mode select "Device initiates connection with peripheral".
  7. In the Bluetooth Address field enter the Bluetooth MAC address of the scanner. This 12-character ID is found
    • From the PR2f display under Bluetooth settings
    • The MAC address may also be displayed on the device label.
  8. If using security:
    1. For Security select "Enabled."
    2. For Security Key enter the key entered when enabling authentication for the printer in NETira CT.
  9. Click Pair with peripheral to initiate pairing.

If an incorrect media type is selected, the PR2f printer displays a media error (Media Button blinking red) after single print. This can be fixed by configuring correct printer properties for the correct media.