ProGlove MARK 2 Wearable Scanner

The ProGlove MARK 2 scanner is a Bluetooth Low Energy device.

  • VoiceCatalyst 4.3.1 or greater is required
  • VoiceConsole 5.4 (with ECS016) or greater is required.

ProGlove Bluetooth Low Energy scanners must be connected using a FriendlyName barcode. Also, the A700x is always the initiator. No other pairing method is possible with this scanner. Contact Technical Support for a FriendlyName barcode.

Talkman Device as Initiator, Scanner as Acceptor

Configure Task and VoiceConsole

  1. Set the following advanced parameter in Task config
    barcodeport = bt_scan
  2. Turn on Bluetooth on the device.
  3. View the properties of the device and ensure Bluetooth is enabled. If it is not enabled, click Edit this device and set Bluetooth Enabled to "enabled".
  4. Select Pair this device with a peripheral.
  5. For pairing type, select “BLE Scanner”.
  6. Give the pairing a name.
  7. Enter the FriendlyName which must match the barcode.
  8. Click Pair with peripheral to initiate pairing.
  9. Scan the FriendlyName barcode with the scanner.
  10. Scanner beeps when connected,