Sharing the SRX2/SRX3 Headset

By separating the parts of the modular SRX2/SRX3 headset, operators can share electronic modules in a multi-shift operation.

• The electronic module detaches easily from the headband .
• The microphone cap detaches from the electronic module and docks in the mic cap pocket on the headband.
• The electronic module can be disinfected with an alcohol wipe.

1. Remove the microphone cap.
   
2. Store the microphone cap on the headband.
   
3. Remove the electronics module from the headband.
   
4. The electronics module may now be shared. The headband can be stored until the user needs it again.

Operator Profiles and Shared Headsets

Honeywell Voice Software (VoiceClient and VoiceCatalyst), along with VoiceConsole provide a feature called Automatic Operator Load. This feature enables a Honeywell device to recognize and load the profile of the operator who last used the headset, based on the unique ID of the electronic module.

With automatic operator loading, operators who always use the same headset can start their shifts faster. When multiple operators share an electronic module, however, automatic operator loading may not be effective.

Disabling automatic operator loading in the voice software task package settings:

1. Using VoiceConsole, edit the task package that is being used.
2. Set the parameter AutoOperatorLoadEnable to zero (0).
3. Save your changes and load the modified task package onto the devices. See VoiceConsole Help for detailed steps.
4. Operators must use the Plus (+) or Minus (—) buttons to scroll through the list of operators to load their voice profiles.