Manual Pairing with A700/A700x

Prerequisites:

• The headset is powered off.
• The Talkman device is not in a charger, and there is no wired headset connected to it.
• The Talkman device is in sleep mode — not in use running a task or voice application. Its green LED indicator is flashing. If the LED is solid green, press the Play/Pause button.
• The Talkman device is Bluetooth ready with Bluetooth connection features enabled.

1. Turn on the headset.

   The LED indicator is solid green. The headset remains in pairing mode for ten minutes then powers off.

2. Press and hold the Plus (+) and Minus (-) buttons on the Talkman device for two seconds to manually initiate a search for wireless headsets.
3. Immediately hold the headset and device so they are within six inches of each other but not touching.

   The blue LED indicator on the Talkman device turns on, may flash a few times, and then remains lit. After 20 to 30 seconds, the headset beeps three ascending tones and its LED indicator flashes blue. These indicators confirm that a pairing has completed.

4. Put on the headset. You hear the headset repeat the serial number of the Talkman device to which it is paired.
5. Verify that the number matches the serial number on the Talkman device.

   If you need to attempt the pairing again, re-enter pairing mode by press the Plus (+) and Minus (-) buttons on the Talkman device again.

6. Press the Play/Pause button on the Talkman device to confirm the number.
7. Press the Play/Pause button again to begin working.