Inserting a Battery into the SRX Wireless Headset

Do not force the battery into the compartment. Doing so may result in damage to the battery or the headset. If the battery does not snap easily into place, reposition the battery in the compartment and try again.

  1. Make sure the battery is charged. A battery is fully charged and can be removed from the charger when the left and right LED indicators for that slot on the charger are green.
  2. Hold the headset with the battery compartment facing toward you.
  3. Place the end of the battery with the contacts into the compartment first so that the contacts on the bottom of the battery line up with the contacts in the compartment.
  4. Press down on the battery until it snaps into place.
  5. Make sure the battery is firmly in place and cannot be removed without pressing the battery release button.

Replace a battery only with another battery that has been authorized by Honeywell for the product you are using. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. See also Honeywell Battery Safety