Storing the SRX2/SRX3 Hard-Hat Headset

Honeywell recommends storing the hard hat with the headset earcup moved up on the side of the hat (see figure below) to reduce the risk of damage.

1. Remove the electronic module from the headset. The electronic module can be used by another worker or stored separately.
2. Detach the microphone cap from the electronic module, and dock it in the mic cap pocket located above the headset earcup.

   

3. Pull the earcup and fork assembly out away from the hard hat until the fork snaps into the outer lock position.
4. Rotate the headset n the hard-hat clip until the earcup rests against the side of the hat.