Spoken Error Messages

Error Message Solution
"Battery is very low. Powering off. Must replace battery after power off complete." Change the battery.
"Battery is getting low." Change the battery.
"Battery is getting low. Change battery now." Change the battery.
"Cannot load operator while sending templates." Ensure all templates have fully loaded before initializing the operator.
"Cannot load task. Processing data."
  1. Turn the device off and then turn it back on again.
  2. Reload the task.
  3. Reboot the device.
  4. Reload VoiceClient.
"Corrupt task file. Task load failed."
  1. Turn the device off and then turn it back on again.
  2. Reload the task.
  3. Reboot the device.
  4. Reload VoiceClient.
"Corrupted operator data." Reload the operator.
"Failed to load lookup table. Task load failed."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reload the task.
  4. Reboot the device.
  5. Reload VoiceClient.
"Failed to load task audio file. Task load failed."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reload the task.
  4. Reboot the device.
  5. Reload VoiceClient.
"Failed to load task phonetic file. Task load failed."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reload the task.
  4. Reboot the device.
  5. Reload VoiceClient.
"Failed to load task VCF file. Task load failed."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reload the task.
  4. Reboot the device.
  5. Reload VoiceClient.
"Failed to load device emulation config file. Task load failed."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reload the task.
  4. Reboot the device.
  5. Reload VoiceClient.
"Failed to write the ODR NTI registration file. Task load failed."
  1. Reload the task.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Firmware error while changing task. Task not changed."
  1. Reload the task.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Flash error."
  1. Turn the device off and then turn it back on again.
  2. Reboot the device.
  3. Reload VoiceClient.
"Flash is full. Please wait while Talkman turns off."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Headset battery is getting low." Change the battery.
"Headset battery is getting low. Change headset battery now." Change the battery.
"Initializing operator failed. Please reload operator."
  1. Reload the operator.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Internal error loading operator."
  1. Turn the device off and then turn it back on again.
  2. Reboot the device.
  3. Reload VoiceClient.
"Invalid operator file name." Select the operator again or load a different operator.
"No task list file found. Task unchanged."
  1. Reload the task.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Noise sampling procedure failed."
  1. Sample noise again.
  2. Go to a quieter location and perform another noise sample.
  3. Try using another headset and perform the noise sample.

    If swapping the headset resolves the issue the original headset may be damaged.
"Noise sampling procedure timed out."
  1. Sample noise again.
  2. Reboot the device.
"Operator load failed."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Power-off error."
  1. Power on the device.
  2. Reboot the device.
"Self test mode set, but no script file found." Edit the task configuration file, taskname.vcf, and change the line selftest=1 to selftest=0.
"Software error while changing task. Task unchanged."
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reload the task.
  4. Reboot the device.
  5. Reload VoiceClient.
"Task load failed."
  1. Go to an area of known good coverage.
  2. Reload the task.
  3. Reboot the device.
  4. Reload VoiceClient.
"Task not loaded. No task name available."
  1. Reload the task.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Unable to receive input data."
  1. Turn the device off and then turn it back on again.
  2. Reboot the device.
  3. Reload VoiceClient.
"Unable to retrieve operator files."
  1. Turn the device off and then turn it back on again.
  2. Reboot the device.
  3. Reload VoiceClient.
"Unable to send output data."
  1. Turn the device off and then turn it back on again.
  2. Reboot the device.
  3. Reload VoiceClient.
"Unable to train words. Not enough free flash memory."
  1. Wait for the device to go to sleep.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
"Warning, low flash memory!"
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
  5. Place the device in a charger as soon as possible.
"Warning, low flash memory! You must upload your collected data now!"
  1. Go to an area of known good coverage.
  2. Turn the device off and then turn it back on again.
  3. Reboot the device.
  4. Reload VoiceClient.
  5. Place the device in a charger as soon as possible.