| 0x020a |
Event detect initialization failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x0203 |
Event control failed to create shared data module. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x0206 |
Battery is getting low. |
Change the battery.
|
| 0x0207 |
Battery is getting low. Change battery now. |
Change the battery.
|
| 0x0208 |
Battery is very low. Powering off. Must replace battery
after power off complete. |
Change the battery.
|
| 0x0602 |
Noise sampling procedure failed. |
— |
| 0x0603 |
Noise sampling procedure timed out. |
— |
| 0x0605 |
Invalid operator file name. |
— |
| 0x060c |
Train returned bad status to UpdTrain. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x060e |
Unable to train words. Not enough free flash memory. |
— |
| 0x0802 |
Speak failed to initialize properly. |
- Check the crashdump file. For more information, see the
VoiceConsole online help.
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x0804 |
Speech-out failed. Audio system failure. |
- Check the crashdump file. For more information, see the
VoiceConsole online help.
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1201 |
Dialog power-off failed. |
- Check the crashdump file. For more information, see the
VoiceConsole online help.
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1202 |
Task not loaded. No task name available. |
— |
| 0x1203 |
OperLoad failed -- TmplSend busy. |
— |
| 0x1204 |
Operator load failed. |
— |
| 0x1205 |
Corrupted operator data. |
— |
| 0x1206 |
Noise sample failed. |
— |
| 0x1207 |
There are no operators in this team. |
— |
| 0x1208 |
Unable to retrieve operator files. |
— |
| 0x1209 |
Internal error loading operator. |
— |
| 0x120a |
Task load failed. |
— |
| 0x120b |
Self test mode set, but no script file found. |
— |
| 0x120c |
No task list file found. Task unchanged. |
— |
| 0x120d |
Software error while changing task. Task unchanged. |
— |
| 0x120e |
Failed to load look up table. Task load failed. |
— |
| 0x1210 |
Failed to load terminal emulation configuration file. Task load
failed. |
— |
| 0x1211 |
Corrupt terminal emulation configuration file. Task load
failed. |
— |
| 0x1212 |
Corrupt task file. Task load failed. |
— |
| 0x1213 |
Failed to load task Honeywell configuration file. Task load
failed. |
— |
| 0x1214 |
Failed to write the output data record network transport information
registration file. Task load failed. |
— |
| 0x1215 |
Failed to write dialog terminal-off files in the terminal charger
after task or operator load. |
- Reload the operator.
- Reload the task.
- Reload VoiceClient.
|
| 0x1216 |
Retraining word failed. Please try again. |
— |
| 0x1217 |
Initializing operator failed. Please reload operator. |
— |
| 0x1218 |
Failed to load task phonetic file. Task load failed. |
— |
| 0x1219 |
Failed to load task audio file. Task load failed. |
— |
| 0x1402 |
Communications error: Process message service receive error. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1403 |
Communications error: Process message service send error. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1406 |
Communications error: Process message service GetIdFromName
error. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x140a |
Communications error: Unable to close Honeywell configuration
file. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x140f |
Communications error: Unable to delete Honeywell configuration
file. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1410 |
Communications error: Honeywell network transport information
registration failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1411 |
Communications error: Unrecognized process message service
message. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1414 |
Communications error: Unable to spawn barcode process. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1415 |
Communications error: Unable to spawn serial process. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1417 |
Communications error: Bad FTP command. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x141b |
Communications error: Bad socket command. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1420 |
Error: Unable to initialize barcode port. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1421 |
Display Mode host name or IP address bad. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1422 |
Display Mode service name or port bad. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1423 |
Error: Unable to initialize Debug/training COM port. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1425 |
Socket host name or IP address bad. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
- Reload the task.
- Verify the task's output data records (ODRs) and lookup tables
(LUTs) have correct and valid socket host and service
information. If you need assistance, contact Honeywell.
|
| 0x1426 |
Socket service name or port bad. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
- Reload the task.
- Verify the task's output data records (ODRs) and lookup tables
(LUTs) have correct and valid socket host and service
information. If you need assistance, contact Honeywell.
|
| 0x1427 |
Unable to send file via socket. Unable to open. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x142a |
Invalid Terminal Manager service name or port. |
— |
| 0x142c |
Telnet session manager failed to start. |
— |
| 0x142d |
Telnet client process failed to start. |
— |
| 0x142e |
Telnet VT220 emulation process failed to start. |
— |
| 0x142f |
Unable to open send data file, for telnet send. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1430 |
Error, Unable to Initialize Printer Port. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1431 |
Unable to print label, unable to open file. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1432 |
Printer Error, Process Message Service Send Error. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1433 |
Comm Error, Unable to spawn printer process. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1600 |
File Manager initialization failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1601 |
File Manager process message service receive failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1602 |
Warning, low flash memory. |
— |
| 0x1603 |
Warning, low flash memory. You must upload your collected data now. |
— |
| 0x1a01 |
Process history data initialization failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1a02 |
Process history data process message service receive failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1a03 |
Process history data process message service retry failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1a04 |
Process history data file descriptor structure error. |
- Turn the device off and then turn it back on again.
- Reload the task.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1a05 |
Process history data lookup table structure error. |
- Turn the device off and then turn it back on again.
- Reload the task.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1a06 |
Process history data bins to records write error. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1a09 |
Process history data power-off error. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1a0b |
Process history data process message service initialization data file
descriptor failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1e01 |
Video terminal emulation initialization failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x1e02 |
Video terminal emulation process message service receive failed. |
- Turn the device off and then turn it back on again.
- Reboot the device.
- Reload VoiceClient.
|
| 0x2100 |
Flash failed to virtual allocate the flash device. |
— |
| 0x2101 |
Flash failed to initialize the device for the file system. |
— |
| 0x2102 |
Flash failed to virtual copy the flash device. |
— |
| 0x2104 |
Flash failed because of erase block argument was invalid. |
— |
| 0x2105 |
Flash library failed during erase. |
— |
| 0x2106 |
Flash failed because of invalid flash write pointer argument. |
— |
| 0x2107 |
Flash library failed during write. |
— |
| 0x2108 |
Flash failed because of invalid flash read pointer argument. |
— |
| 0x2109 |
Flash library failed during read. |
— |
| 0x210a |
Flash library failed while deleting a file. |
— |
| 0x210b |
Flash library failed while finding a file. |
— |
| 0x210c |
Flash failed to open the specified file in RAM. |
— |
| 0x210d |
Flash failed to read the specified file from RAM. |
— |
| 0x210e |
Flash failed to write the specified file to RAM. |
— |
| 0x210f |
Flash library failed while opening a file. |
— |
| 0x2110 |
Flash library failed while closing a file. |
— |
| 0x2111 |
Flash had invalid flash file image generator linked list. |
— |
| 0x2112 |
Flash is full. Please wait while Talkman turns off. |
— |
| 0x2115 |
Flash library failed. Out of space. |
— |
| 0x2116 |
Flash library failed during reclaim. |
— |