Loading an Operator's Templates on A700/A700x

You need a device with a charged battery, headset, and any other equipment (belt, barcode reader) you are going to use. You must be within radio range.

Make sure the device is on or sleeping. The device should have a solid green ring segment (on) or a rotating green ring (sleeping). If the device is off or sleeping, press the Play/Pause button.

1. Press the Operator button.The device says "Current operator is operator name. Select menu item."
   
2. Press the + button or — button until the device says, "Change operator."
   
3. Press the Operator button.
   
4. The device says, "Please wait" and retrieves a list of operators and teams. Wait for the device to say, "Select team".
   • If the device says "Current operator is (operator name). Change operator", skip to step 8.
5. Press the + button or — button to scroll through the list of operator teams until you hear the name of a team to which you belong.
   
6. Press the operator button.
   
   The device says, "Please wait" and retrieves a list of all operators who belong to the team that was selected. The device then says, "Current operator is (operator name). Select new operator."
7. Press the + button or — button to scroll through the list of available operator names until you hear your name.
   
   
   • If you do not hear your name, press the yellow play/pause button to cancel this operation and start over from step 2.
   • When selecting a team in step 5, choose the "All Operators" team.
   • Consult with your supervisor if you are not listed in the "All Operators" team.
8. Press the operator button.
   
   The device says, "Loading operator" and loads your templates. Once it has loaded your templates, the device says, "Current operator is (your operator name). Good night." The device then goes to sleep. The next time you turn the device on, it is ready to use.