Collecting Platform Debug Logs from A700/A700x Devices

Make sure that the USB driver is installed for the PC that you are using to collect logs.

1. Using a standard USB cable, connect the device to a computer.
2. Power on the device.
3. On your computer, run a serial terminal emulator, such as HyperTerminal, using the following settings:
   • Bits per Second: 57600
   • Data Bits: 8
   • Parity: None
   • Stop Bits: 1
   • Flow Control: None

The device transfers platform logs 30 seconds after connection and then once a minute after that. The results are viewable within the serial terminal emulator window.