Easy Configuration: Initial Setup

The following instructions are for initially setting up the site. That is, no devices are currently connected to VoiceConsole.

  1. Create a device profile in VoiceConsole.
    You can set the device profile as a "default profile," which automatically loads to any bare-platform devices. The devices must be in standby mode and connected to VoiceConsole.
    The Talkman A500 model TT-802 ships as a bare-platform device. It does not have Honeywell voice software—VoiceCatalyst or VoiceClient—preloaded.
  2. In the Advanced Device Settings text box, type this parameter: "distributable"="1"
    The value of "1" marks the device profile as one that can be shared with other devices using the serial connection between bays in the A500 charger. If this parameter is not placed in the device profile or if its value is set to zero, the device profile is not shared.
  3. Follow the instructions in the VoiceConsole online help for completing the device profile.
  4. Use a serial cable to load this profile to a single device.
    If the device profile you are loading is configured for use with static IP addresses, all the devices have the same IP address.