A500
Products intended for sale within the European Union are marked with the CE Mark, which indicates compliance to applicable Directives and European Normes (EN) as follows. Amendments to these Directives or ENs are included.
|
Model Name |
Part Number |
Model Number |
|---|---|---|
|
A500 |
TT-802 |
TAP802-01 |
|
|
This wireless device operates in the 2.4 GHz, 5 GHz, and 13.56 MHz frequency bands and is intended for light industrial use in all EU and EFTA member states. See restrictions below. |
|
|
BE |
BG |
CZ |
DK |
DE |
EE |
IE |
EL |
|
ES |
FR |
HR |
IT |
CY |
LV |
LT |
LU |
|
|
HU |
MT |
NL |
AT |
PL |
PT |
RO |
SI |
|
|
SK |
FI |
SE |
IS |
NO |
LI |
CH |
|
This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption in communications of this device. The Access Point's radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.
In order to ensure compliance with the latest European standards, VoiceCatalyst 2.1.1 or later or VoiceClient 3.9.1 or later voice software must be loaded on A500 devices.
|
Frequency Band (Mhz) |
Max (dBm EIRP) |
|---|---|
|
2402-2480 |
5.7 |
|
2412-2472 |
17.9 |
|
5180-5320 |
11.8 |
|
5500-5700 |
11.5 |
2.4GHz Restrictions 2400-2483.5 MHz band
|
FR |
Outdoor use is limited to 10mW e.i.r.p. within the band 2454–2483.5 MHz. There are no restrictions when used in other parts of the 2,4 GHz band. Check http://www.arcep.fr/ for more details. |
|
IT |
This product meets the National Radio Interface and the requirements specified in the Nation Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a "general authorization." Please check http://www.sviluppoeconomico.gov.it/ for more details |
5GHz Restrictions 5150-5350 MHz band:
|
Channels 36, 40, 44, 48, 52, 56, 60, or 64, are restricted to indoor use only for the entire European Community: |
|||||||
|---|---|---|---|---|---|---|---|
|
BE |
BG |
CZ |
DK |
DE |
EE |
IE |
EL |
|
ES |
FR |
HR |
IT |
CY |
LV |
LT |
LU |
|
HU |
MT |
NL |
AT |
PL |
PT |
RO |
SI |
|
SK |
FI |
SE |
IS |
NO |
LI |
CH |
|
This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption in communications of this device. The Access Point's radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.
In order to ensure compliance with the latest European standards, VoiceCatalyst 2.1.1 or later or VoiceClient 3.9.1 or later voice software must be loaded on A500 devices.
|
Model Name |
Part Number |
Model Number |
|---|---|---|
|
A500 A500 |
TT-800 TT-801 |
TT-801-1-1 TAP801-01 |
|
This device is a 2.4 GHz wireless device intended for light industrial use in all EU and EFTA member states. |
|
EU/CE Contact:
Honeywell Productivity Solutions B.V.
Burgemeester Burgerslaan 40
5245NH Rosmalen
The Netherlands