Pairing by VoiceConsole Pairing

The VoiceConsole pairing method should only be used if the device/headset pairing is performed once and never changed. While manual pairing can also result in this permanent pairing, VoiceConsole eliminates the device inquiry step and begins paging immediately for the Bluetooth address.

Prerequisites:

• The headset is powered off.
• The device is not in a charger, and there is no wired headset connected to it.
• The device is in sleep mode — not in use running an application.
• The device is Bluetooth ready with Bluetooth connection features enabled.

1. In VoiceConsole, click Devices and select the device for the pairing.
2. In Device Actions, select the actions for pairing to a peripheral, and complete the pairing. See VoiceConsole help for detailed instructions.
   The pairing can be performed with the device powered off or while the device is running an application. When the device powers up or goes into sleep mode, the paging process begins.
3. Place the headset in pairing mode. The SRX2 and SRX3 headsets are automatically in pairing mode after being powered on.
4. When the two connect, the headset plays ascending connect tones. The pairing confirmation step is skipped because the pairing was specified by the user.
5. Press the Play/Pause button to begin working.