Configuring the QTERM Visual Training Device

You cannot change the default baud rate for the QTERM training device setting of 9600 for versions of VoiceClient 1.x or 3.x.

1. Verify that the task is loaded onto the device.
2. Verify that the device is sleeping.
3. Verify that the training device is connected to the device.
4. On the training device, press and hold the 1 key.
5. Still holding the 1 key, press the device's yellow play/pause button.
6. Contrast appears on the training device screen.
7. On the training device, press:
   1 to increase the contrast
   2 to decrease the contrast
   3 to accept the current setting
   After you press 3, Baud Rate appears on the training device screen.
8. On the training device, press 1 until a baud rate of 9600 appears on the screen.
9. Press 3 to accept the baud rate setting.
   Bits appears on the training screen.
10. On the training device, press 3 to accept 8 as the bits setting.
    Parity appears on the training screen.
11. On the training device, press 3 to accept "n" (None) as the parity setting.
    Stop Bits appears on the training device screen.
12. On the training device, press 3 to accept 1 as the stop bits setting.
13. On the Talkman device, press the yellow play/pause button to turn the device on.
    The device takes a background noise sample and begins training.