Cleaning Headsets

The foam pads used with Honeywell headsets were designed for both comfort and hygiene. The materials naturally inhibit the growth of bacteria and can be cleaned by rinsing with water and drying.

Commercial cleaning solvents are not recommended.

• Clean the plastic parts of the headsets with a soft cloth dampened with water. To clean and disinfect the headset plastic, use a pre-moistened alcohol wipe.
• If the Talkman Connectors or plugs become contaminated, use a pre-moistened alcohol wipe to remove dirt or residue.
• If the metal connection points on the Talkman's Connectors become discolored, use a soft pencil eraser to clean them.
• Do not use unapproved liquids to clean the yellow, blue, and red Talkman Connectors (TCOs) and any associated headset, scanner, or device plugs.
• Hand or machine wash dual-cupped headset earpad covers in cold or warm water, then air dry the covers. The covers are made of 100% cotton flannel and may shrink if dried in a clothes dryer.