A500 Charger LEDs

Honeywell Talkman devices, wireless headsets, and their chargers have LEDs that indicate the state of the equipment. These LEDs may be on, off or blink. In some cases an LED blinks, alternating between two colors.

If the LEDs indicate that there is a problem, refer to information on troubleshooting to solve the problem. See Troubleshooting Problems Indicated by LED.

LED Behavior

The upper pair of indicators applies to the charger's battery slots. The lower pair applies to the device slots. The LED conditions described here apply to the lower pair.

If there is no device in the charger or if the device in the charger does not have a battery and one of these conditions occurs, disconnect the charger from its power source for about five seconds, then reconnect the charger. If the condition persists, return the charger for service.

Left Indicator Color	Right Indicator Color	If a device with a battery is the charger...
Off	Off	Troubleshoot the problem
Green	Green	The battery is charged and ready to use.
Red	Off	The battery is being charged.
Blinking Red	Off	The battery may not be inserted into the charger correctly. If the LED continues to blink red after inserting the battery into the charger correctly, troubleshoot the charger.
Off	Yellow	The battery may not be inserted into the charger correctly. The battery may be too hot or too cold. Wait for the battery's temperature to normalize.